DOFMap

Output degree-of-freedom (DOF) map.

Overview

When debugging a simulation it may be necessary to investigate the degree-of-freedom (DOF) map, the DOFMap output is designed to provide a machine readable file format for investigating the DOF map.

Input Parameters

  • output_fileTrueOutput to the file

    Default:True

    C++ Type:bool

    Controllable:No

    Description:Output to the file

  • output_screenFalseOutput to the screen

    Default:False

    C++ Type:bool

    Controllable:No

    Description:Output to the screen

  • system_namenl0System to output

    Default:nl0

    C++ Type:std::string

    Controllable:No

    Description:System to output

  • use_displacedFalseEnable/disable the use of the displaced mesh for outputting

    Default:False

    C++ Type:bool

    Controllable:No

    Description:Enable/disable the use of the displaced mesh for outputting

Optional Parameters

  • additional_execute_onThe list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, MULTIAPP_FIXED_POINT_END, MULTIAPP_FIXED_POINT_BEGIN, FINAL, FAILED, CUSTOM, ALWAYS.

    C++ Type:ExecFlagEnum

    Options:NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, MULTIAPP_FIXED_POINT_END, MULTIAPP_FIXED_POINT_BEGIN, FINAL, FAILED, CUSTOM, ALWAYS

    Controllable:No

    Description:The list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, MULTIAPP_FIXED_POINT_END, MULTIAPP_FIXED_POINT_BEGIN, FINAL, FAILED, CUSTOM, ALWAYS.

  • execute_onINITIALThe list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, MULTIAPP_FIXED_POINT_END, MULTIAPP_FIXED_POINT_BEGIN, FINAL, FAILED, CUSTOM, ALWAYS.

    Default:INITIAL

    C++ Type:ExecFlagEnum

    Options:NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, MULTIAPP_FIXED_POINT_END, MULTIAPP_FIXED_POINT_BEGIN, FINAL, FAILED, CUSTOM, ALWAYS

    Controllable:No

    Description:The list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, MULTIAPP_FIXED_POINT_END, MULTIAPP_FIXED_POINT_BEGIN, FINAL, FAILED, CUSTOM, ALWAYS.

  • output_linearFalseSpecifies whether output occurs on each PETSc linear residual evaluation

    Default:False

    C++ Type:bool

    Controllable:No

    Description:Specifies whether output occurs on each PETSc linear residual evaluation

  • output_nonlinearFalseSpecifies whether output occurs on each PETSc nonlinear residual evaluation

    Default:False

    C++ Type:bool

    Controllable:No

    Description:Specifies whether output occurs on each PETSc nonlinear residual evaluation

Execution Scheduling Parameters

  • append_dateFalseWhen true the date and time are appended to the output filename.

    Default:False

    C++ Type:bool

    Controllable:No

    Description:When true the date and time are appended to the output filename.

  • append_date_formatThe format of the date/time to append, if not given UTC format is used (see http://www.cplusplus.com/reference/ctime/strftime).

    C++ Type:std::string

    Controllable:No

    Description:The format of the date/time to append, if not given UTC format is used (see http://www.cplusplus.com/reference/ctime/strftime).

  • file_baseThe desired solution output name without an extension. If not provided, MOOSE sets it with Outputs/file_base when available. Otherwise, MOOSE uses input file name and this object name for a master input or uses master file_base, the subapp name and this object name for a subapp input to set it.

    C++ Type:std::string

    Controllable:No

    Description:The desired solution output name without an extension. If not provided, MOOSE sets it with Outputs/file_base when available. Otherwise, MOOSE uses input file name and this object name for a master input or uses master file_base, the subapp name and this object name for a subapp input to set it.

  • output_if_base_containsIf this is supplied then output will only be done in the case that the output base contains one of these strings. This is helpful in outputting only a subset of outputs when using MultiApps.

    C++ Type:std::vector<std::string>

    Controllable:No

    Description:If this is supplied then output will only be done in the case that the output base contains one of these strings. This is helpful in outputting only a subset of outputs when using MultiApps.

  • padding4The number of digits for the extension suffix (e.g., out.e-s002)

    Default:4

    C++ Type:unsigned int

    Controllable:No

    Description:The number of digits for the extension suffix (e.g., out.e-s002)

File Name Customization Parameters

  • control_tagsAdds user-defined labels for accessing object parameters via control logic.

    C++ Type:std::vector<std::string>

    Controllable:No

    Description:Adds user-defined labels for accessing object parameters via control logic.

  • enableTrueSet the enabled status of the MooseObject.

    Default:True

    C++ Type:bool

    Controllable:Yes

    Description:Set the enabled status of the MooseObject.

Advanced Parameters

  • end_stepTime step at which this output object stop operating

    C++ Type:int

    Controllable:No

    Description:Time step at which this output object stop operating

  • end_timeTime at which this output object stop operating

    C++ Type:double

    Controllable:No

    Description:Time at which this output object stop operating

  • interval1The interval at which time steps are output to the solution file

    Default:1

    C++ Type:unsigned int

    Controllable:No

    Description:The interval at which time steps are output to the solution file

  • minimum_time_interval0The minimum simulation time between output steps

    Default:0

    C++ Type:double

    Controllable:No

    Description:The minimum simulation time between output steps

  • start_stepTime step at which this output object begins to operate

    C++ Type:int

    Controllable:No

    Description:Time step at which this output object begins to operate

  • start_timeTime at which this output object begins to operate

    C++ Type:double

    Controllable:No

    Description:Time at which this output object begins to operate

  • sync_onlyFalseOnly export results at sync times

    Default:False

    C++ Type:bool

    Controllable:No

    Description:Only export results at sync times

  • sync_timesTimes at which the output and solution is forced to occur

    C++ Type:std::vector<double>

    Controllable:No

    Description:Times at which the output and solution is forced to occur

  • sync_times_objectTimes object providing the times at which the output and solution is forced to occur

    C++ Type:TimesName

    Controllable:No

    Description:Times object providing the times at which the output and solution is forced to occur

  • time_tolerance1e-14Time tolerance utilized checking start and end times

    Default:1e-14

    C++ Type:double

    Controllable:No

    Description:Time tolerance utilized checking start and end times

Timing And Frequency Of Output Parameters

  • linear_residual_dt_divisor1000Number of divisions applied to time step when outputting linear residuals

    Default:1000

    C++ Type:double

    Controllable:No

    Description:Number of divisions applied to time step when outputting linear residuals

  • linear_residual_end_timeSpecifies an end time to begin output on each linear residual evaluation

    C++ Type:double

    Controllable:No

    Description:Specifies an end time to begin output on each linear residual evaluation

  • linear_residual_start_timeSpecifies a start time to begin output on each linear residual evaluation

    C++ Type:double

    Controllable:No

    Description:Specifies a start time to begin output on each linear residual evaluation

  • nonlinear_residual_dt_divisor1000Number of divisions applied to time step when outputting non-linear residuals

    Default:1000

    C++ Type:double

    Controllable:No

    Description:Number of divisions applied to time step when outputting non-linear residuals

  • nonlinear_residual_end_timeSpecifies an end time to begin output on each nonlinear residual evaluation

    C++ Type:double

    Controllable:No

    Description:Specifies an end time to begin output on each nonlinear residual evaluation

  • nonlinear_residual_start_timeSpecifies a start time to begin output on each nonlinear residual evaluation

    C++ Type:double

    Controllable:No

    Description:Specifies a start time to begin output on each nonlinear residual evaluation

Petsc Linear/Nonlinear Output Parameters