Tensor Mechanics Master Action System

Set up stress divergence kernels with coordinate system aware logic

The TensorMechanics Master Action is a convenience object that simplifies part of the mechanics system setup.

It applies to both the current kernel system based on the StressDivergenceTensors kernels and to the new kernel system based on the TotalLagrangianStressDivergence and UpdatedLagrangianStressDivergence kernels. Some options only apply to one or the other system, as outlined below.

It performs

Add StressDivergence Kernels (for the current coordinate system) – both systems, only Cartesian coordinates for the Lagrangian kernel system
Add WeakPlaneStress Kernel (for weak enforcement of the plane stress condition) – only the StressDivergenceTensors system
Add Strain calculation material (for the chosen strain model) – both systems
Correctly set use of displaced mesh – both systems
Optional: Setup of displacement variables (with the correct order for the current mesh) – both systems
Optional: Add AuxVariables and AuxKernels for various tensor components and quantity outputs – both systems
Optional: Set up out-of-plane stress/strain consistently – only the StressDivergenceTensors system
Optional: Automatic extraction of eigenstrain names from materials and correct application to proper blocks – both systems
Optional: Setup cell-average homogenization constraints on the simulation – only the new Lagrangian kernels

Constructed MooseObjects

The Tensor Mechanics Master Action is used to construct the kernels, displacement variables, and strain materials in a consistent manner as required for a continuum mechanics simulation simulation. Optionally it generates aux variables and auxkernels to aid in the output of tensor components and scalar quantities.

For the `StressDivergenceTensors` Kernels

Table 1: Correspondence Among Action Functionality and MooseObjects for the Tensor Mechanics Master Action, current kernel system

Functionality	Replaced Classes	Associated Parameters
Calculate stress divergence equilibrium for the given coordinate system	StressDivergenceTensors and optionally WeakPlaneStress or StressDivergenceRZTensors or StressDivergenceRSphericalTensors	`displacements` : a string of the displacement field variables
Add the displacement variables	Variables	`add_variables`: boolean
Calculation of strain for the given coordinate system	ComputeFiniteStrain or ComputePlaneFiniteStrain or ComputeAxisymmetric1DFiniteStrain or ComputeAxisymmetricRZFiniteStrain	`strain`: MooseEnum to select finite or strain formulations
	ComputeSmallStrain or ComputePlaneSmallStrain or ComputeAxisymmetric1DSmallStrain or ComputeAxisymmetricRZSmallStrain
	ComputeIncrementalSmallStrain or ComputePlaneIncrementalStrain or ComputeAxisymmetric1DIncrementalStrain or ComputeAxisymmetricRZIncrementalStrain	`incremental` : boolean for using a incremental strain formulation
Add AuxVariables and AuxKernels for various tensor component and quantity outputs	Material Properties as well as AuxVariables and RankTwoAux or RankTwoScalarAux or RankFourAux	`generate_output`: a string of the quantities to add
Add Material Properties for various tensor component and quantity outputs	`generate_output`: a string of the quantities to add
Add the optional global strain contribution to the strain calculation	Couples the GlobalStrain system	`global_strain`: name of the material property that computes the global strain tensor

Note that there are many variations for the calculation of the stress divergence and the strain measure. Review the theoretical introduction for the Stress Divergence and the Strain Formulations for more information.

For the New Lagrangian Kernel system

Table 2: Correspondence Among Action Functionality and MooseObjects for the Tensor Mechanics Master Action, new kernel system

Functionality	Replaced Classes	Associated Parameters
Calculate stress divergence equilibrium for the given coordinate system	TotalLagrangianStressDivergence or UpdatedLagrangianStressDivergence	`displacements` : a string of the displacement field variables, `formulation` : a MooseEnum controlling if the `UPDATED` or `TOTAL` Lagrangian formulation is used
Add the displacement variables	Variables	`add_variables`: boolean
Calculation of strain for the given coordinate system	ComputeLagrangianStrain	`strain`: MooseEnum to select finite or small kinematic formulations
Add AuxVariables and AuxKernels for various tensor component and quantity outputs	Material Properties as well as AuxVariables and RankTwoAux or RankTwoScalarAux or RankFourAux	`generate_output`: a string of the quantities to add
Add Material Properties for various tensor component and quantity outputs	`generate_output`: a string of the quantities to add
Add the optional homogenization constraints	Adds all objects required to impose the homogenization constraints	`constraint_types` : MooseEnum controlling whether `strain` or `stress` constraints and imposed, `targets` : Functions providing the time-dependent targets

warning

automatic_eigenstrain_names = true, the eigenstrain_names will be populated under restrictive conditions for classes such as CompositeEigenstrain, ComputeReducedOrderEigenstrain, and RankTwoTensorMaterialADConverter. The input components for these classes are not included in the "eigenstrain_names" passed to the TensorMechanicsAction. Set the automatic_eigenstrain_names = false and populate this list manually if these components need to be included.

Example Input File Syntax

New Kernel System

The following example sets up the new Lagrangian kernel system with a total Lagrangian formulation for a large displacement kinematics problem.

[Master]
  [all]
    strain = SMALL
    add_variables = true
    new_system = true
    formulation = TOTAL
    volumetric_locking_correction = true
    generate_output = 'cauchy_stress_xx cauchy_stress_yy cauchy_stress_zz cauchy_stress_xy cauchy_stress_xz cauchy_stress_yz strain_xx strain_yy strain_zz strain_xy strain_xz strain_yz'
  []
[]

New Kernel System, with Homogenization Constraints

The following uses the action to setup homogenization constraints in a problem using the new kernel system.

[Master]
  [all]
    strain = FINITE
    add_variables = true
    new_system = true
    formulation = TOTAL
    volumetric_locking_correction = false
    constraint_types = 'stress strain strain strain stress strain strain strain strain'
    targets = 'stress11 strain21 strain31 strain12 stress22 strain32 strain13 strain23 strain33'
    generate_output = 'pk1_stress_xx pk1_stress_xy pk1_stress_xz pk1_stress_yx pk1_stress_yy pk1_stress_yz pk1_stress_zx pk1_stress_zy pk1_stress_zz deformation_gradient_xx deformation_gradient_xy deformation_gradient_xz deformation_gradient_yx deformation_gradient_yy deformation_gradient_yz deformation_gradient_zx deformation_gradient_zy deformation_gradient_zz'
  []
[]

Subblocks

The subblocks of the Master action are what triggers MOOSE objects to be built. If none of the mechanics is subdomain restricted a single subblock can be used

[./Master]
  [./all]
    strain = FINITE
    add_variables = true
  [../]
[../]

if different mechanics models are needed, multiple subblocks with subdomain restrictions can be used.

[Modules/TensorMechanics/Master]
  [Modules/TensorMechanics/Master]
    [Modules/TensorMechanics/Master]
      # parameters that apply to all subblocks are specified at this level. They
      # can be overwritten in the subblocks.
      add_variables = true
      strain = FINITE
      generate_output = 'stress_xx'

      [./block1]
        # the `block` parameter is only valid insde a subblock.
        block = 1
      [../]
      [./block2]
        block = 2
        # the `additional_generate_output` parameter is also only valid inside a
        # subblock. Values specified here are appended to the `generate_output`
        # parameter values.
        additional_generate_output = 'strain_yy'
      [../]
    []
  []
[]

Parameters supplied at the [Modules/TensorMechanics/Master] level act as defaults for the Master action subblocks.

Input Parameters

displacementsThe nonlinear displacement variables for the problem
C++ Type:std::vector<VariableName>
Controllable:No
Description:The nonlinear displacement variables for the problem

Required Parameters

absolute_value_vector_tagsThe tag names for extra vectors that the absolute value of the residual should be accumulated into
C++ Type:std::vector<TagName>
Controllable:No
Description:The tag names for extra vectors that the absolute value of the residual should be accumulated into
active__all__ If specified only the blocks named will be visited and made active
Default:__all__
C++ Type:std::vector<std::string>
Controllable:No
Description:If specified only the blocks named will be visited and made active
add_variablesFalseAdd the displacement variables
Default:False
C++ Type:bool
Controllable:No
Description:Add the displacement variables
automatic_eigenstrain_namesFalseCollects all material eigenstrains and passes to required strain calculator within TMA internally.
Default:False
C++ Type:bool
Controllable:No
Description:Collects all material eigenstrains and passes to required strain calculator within TMA internally.
base_nameMaterial property base name
C++ Type:std::string
Controllable:No
Description:Material property base name
constraint_typesType of each constraint: stress or strain.
C++ Type:MultiMooseEnum
Options:strain, stress, none
Controllable:No
Description:Type of each constraint: stress or strain.
control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
cylindrical_axis_point1Starting point for direction of axis of rotation for cylindrical stress/strain.
C++ Type:libMesh::Point
Controllable:No
Description:Starting point for direction of axis of rotation for cylindrical stress/strain.
cylindrical_axis_point2Ending point for direction of axis of rotation for cylindrical stress/strain.
C++ Type:libMesh::Point
Controllable:No
Description:Ending point for direction of axis of rotation for cylindrical stress/strain.
decomposition_methodTaylorExpansionMethods to calculate the finite strain and rotation increments
Default:TaylorExpansion
C++ Type:MooseEnum
Options:TaylorExpansion, EigenSolution, HughesWinget
Controllable:No
Description:Methods to calculate the finite strain and rotation increments
directionDirection stress/strain is calculated in
C++ Type:libMesh::Point
Controllable:No
Description:Direction stress/strain is calculated in
eigenstrain_namesList of eigenstrains to be applied in this strain calculation
C++ Type:std::vector<MaterialPropertyName>
Controllable:No
Description:List of eigenstrains to be applied in this strain calculation
extra_vector_tagsThe tag names for extra vectors that residual data should be saved into
C++ Type:std::vector<TagName>
Controllable:No
Description:The tag names for extra vectors that residual data should be saved into
formulationTOTALSelect between the total Lagrangian (TOTAL) and updated Lagrangian (UPDATED) formulations for the new kernel system.
Default:TOTAL
C++ Type:MooseEnum
Options:TOTAL, UPDATED
Controllable:No
Description:Select between the total Lagrangian (TOTAL) and updated Lagrangian (UPDATED) formulations for the new kernel system.
global_strainName of the global strain material to be applied in this strain calculation. The global strain tensor is constant over the whole domain and allows visualization of the deformed shape with the periodic BC
C++ Type:MaterialPropertyName
Controllable:No
Description:Name of the global strain material to be applied in this strain calculation. The global strain tensor is constant over the whole domain and allows visualization of the deformed shape with the periodic BC
inactiveIf specified blocks matching these identifiers will be skipped.
C++ Type:std::vector<std::string>
Controllable:No
Description:If specified blocks matching these identifiers will be skipped.
incrementalFalseUse incremental or total strain (if not explicitly specified this defaults to incremental for finite strain and total for small strain)
Default:False
C++ Type:bool
Controllable:No
Description:Use incremental or total strain (if not explicitly specified this defaults to incremental for finite strain and total for small strain)
new_systemFalseIf true use the new LagrangianStressDiverence kernels.
Default:False
C++ Type:bool
Controllable:No
Description:If true use the new LagrangianStressDiverence kernels.
scalingThe scaling to apply to the displacement variables
C++ Type:double
Controllable:No
Description:The scaling to apply to the displacement variables
spherical_center_pointCenter point of the spherical coordinate system.
C++ Type:libMesh::Point
Controllable:No
Description:Center point of the spherical coordinate system.
strainSMALLStrain formulation
Default:SMALL
C++ Type:MooseEnum
Options:SMALL, FINITE
Controllable:No
Description:Strain formulation
strain_base_nameThe base name used for the strain. If not provided, it will be set equal to base_name
C++ Type:std::string
Controllable:No
Description:The base name used for the strain. If not provided, it will be set equal to base_name
targetsFunctions giving the target values of each constraint.
C++ Type:std::vector<FunctionName>
Controllable:No
Description:Functions giving the target values of each constraint.
temperatureThe temperature
C++ Type:std::vector<VariableName>
Controllable:No
Description:The temperature
use_automatic_differentiationFalseFlag to use automatic differentiation (AD) objects when possible
Default:False
C++ Type:bool
Controllable:No
Description:Flag to use automatic differentiation (AD) objects when possible
use_finite_deform_jacobianFalseJacobian for corrotational finite strain
Default:False
C++ Type:bool
Controllable:No
Description:Jacobian for corrotational finite strain
verboseFalseDisplay extra information.
Default:False
C++ Type:bool
Controllable:No
Description:Display extra information.
volumetric_locking_correctionFalseFlag to correct volumetric locking
Default:False
C++ Type:bool
Controllable:No
Description:Flag to correct volumetric locking

Optional Parameters

additional_generate_outputAdd scalar quantity output for stress and/or strain (will be appended to the list in `generate_output`)
C++ Type:MultiMooseEnum
Options:cauchy_stress_xx, cauchy_stress_xy, cauchy_stress_xz, cauchy_stress_yx, cauchy_stress_yy, cauchy_stress_yz, cauchy_stress_zx, cauchy_stress_zy, cauchy_stress_zz, creep_strain_xx, creep_strain_xy, creep_strain_xz, creep_strain_yx, creep_strain_yy, creep_strain_yz, creep_strain_zx, creep_strain_zy, creep_strain_zz, creep_stress_xx, creep_stress_xy, creep_stress_xz, creep_stress_yx, creep_stress_yy, creep_stress_yz, creep_stress_zx, creep_stress_zy, creep_stress_zz, deformation_gradient_xx, deformation_gradient_xy, deformation_gradient_xz, deformation_gradient_yx, deformation_gradient_yy, deformation_gradient_yz, deformation_gradient_zx, deformation_gradient_zy, deformation_gradient_zz, elastic_strain_xx, elastic_strain_xy, elastic_strain_xz, elastic_strain_yx, elastic_strain_yy, elastic_strain_yz, elastic_strain_zx, elastic_strain_zy, elastic_strain_zz, mechanical_strain_xx, mechanical_strain_xy, mechanical_strain_xz, mechanical_strain_yx, mechanical_strain_yy, mechanical_strain_yz, mechanical_strain_zx, mechanical_strain_zy, mechanical_strain_zz, pk1_stress_xx, pk1_stress_xy, pk1_stress_xz, pk1_stress_yx, pk1_stress_yy, pk1_stress_yz, pk1_stress_zx, pk1_stress_zy, pk1_stress_zz, pk2_stress_xx, pk2_stress_xy, pk2_stress_xz, pk2_stress_yx, pk2_stress_yy, pk2_stress_yz, pk2_stress_zx, pk2_stress_zy, pk2_stress_zz, plastic_strain_xx, plastic_strain_xy, plastic_strain_xz, plastic_strain_yx, plastic_strain_yy, plastic_strain_yz, plastic_strain_zx, plastic_strain_zy, plastic_strain_zz, small_stress_xx, small_stress_xy, small_stress_xz, small_stress_yx, small_stress_yy, small_stress_yz, small_stress_zx, small_stress_zy, small_stress_zz, strain_xx, strain_xy, strain_xz, strain_yx, strain_yy, strain_yz, strain_zx, strain_zy, strain_zz, stress_xx, stress_xy, stress_xz, stress_yx, stress_yy, stress_yz, stress_zx, stress_zy, stress_zz, effective_plastic_strain, effective_creep_strain, firstinv_stress, firstinv_cauchy_stress, firstinv_pk1_stress, firstinv_pk2_stress, firstinv_small_stress, firstinv_strain, hydrostatic_stress, hydrostatic_cauchy_stress, hydrostatic_pk1_stress, hydrostatic_pk2_stress, hydrostatic_small_stress, intensity_stress, intensity_cauchy_stress, intensity_pk1_stress, intensity_pk2_stress, intensity_small_stress, l2norm_mechanical_strain, l2norm_stress, l2norm_cauchy_stress, l2norm_pk1_stress, l2norm_strain, l2norm_elastic_strain, l2norm_plastic_strain, l2norm_creep_strain, max_principal_mechanical_strain, max_principal_stress, max_principal_cauchy_stress, max_principal_pk1_stress, max_principal_pk2_stress, max_principal_small_stress, max_principal_strain, maxshear_stress, maxshear_cauchy_stress, maxshear_pk1_stress, maxshear_pk2_stress, maxshear_small_stress, mid_principal_mechanical_strain, mid_principal_stress, mid_principal_cauchy_stress, mid_principal_pk1_stress, mid_principal_pk2_stress, mid_principal_small_stress, mid_principal_strain, min_principal_mechanical_strain, min_principal_stress, min_principal_cauchy_stress, min_principal_pk1_stress, min_principal_pk2_stress, min_principal_small_stress, min_principal_strain, secondinv_stress, secondinv_cauchy_stress, secondinv_pk1_stress, secondinv_pk2_stress, secondinv_small_stress, secondinv_strain, thirdinv_stress, thirdinv_cauchy_stress, thirdinv_pk1_stress, thirdinv_pk2_stress, thirdinv_small_stress, thirdinv_strain, triaxiality_stress, triaxiality_cauchy_stress, triaxiality_pk1_stress, triaxiality_pk2_stress, triaxiality_small_stress, volumetric_mechanical_strain, volumetric_strain, vonmises_stress, vonmises_cauchy_stress, vonmises_pk1_stress, vonmises_pk2_stress, directional_stress, directional_strain, axial_stress, axial_strain, axial_plastic_strain, axial_creep_strain, axial_elastic_strain, hoop_stress, hoop_strain, hoop_plastic_strain, hoop_creep_strain, hoop_elastic_strain, radial_stress, radial_strain, spherical_hoop_stress, spherical_hoop_strain, spherical_hoop_plastic_strain, spherical_hoop_creep_strain, spherical_hoop_elastic_strain, spherical_radial_stress, spherical_radial_strain
Controllable:No
Description:Add scalar quantity output for stress and/or strain (will be appended to the list in `generate_output`)
additional_material_output_familySpecifies the family of FE shape functions to use for this variable.
C++ Type:MultiMooseEnum
Options:MONOMIAL, LAGRANGE
Controllable:No
Description:Specifies the family of FE shape functions to use for this variable.
additional_material_output_orderSpecifies the order of the FE shape function to use for this variable.
C++ Type:MultiMooseEnum
Options:CONSTANT, FIRST, SECOND, THIRD, FOURTH, FIFTH, SIXTH, SEVENTH, EIGHTH, NINTH
Controllable:No
Description:Specifies the order of the FE shape function to use for this variable.
generate_outputAdd scalar quantity output for stress and/or strain
C++ Type:MultiMooseEnum
Options:cauchy_stress_xx, cauchy_stress_xy, cauchy_stress_xz, cauchy_stress_yx, cauchy_stress_yy, cauchy_stress_yz, cauchy_stress_zx, cauchy_stress_zy, cauchy_stress_zz, creep_strain_xx, creep_strain_xy, creep_strain_xz, creep_strain_yx, creep_strain_yy, creep_strain_yz, creep_strain_zx, creep_strain_zy, creep_strain_zz, creep_stress_xx, creep_stress_xy, creep_stress_xz, creep_stress_yx, creep_stress_yy, creep_stress_yz, creep_stress_zx, creep_stress_zy, creep_stress_zz, deformation_gradient_xx, deformation_gradient_xy, deformation_gradient_xz, deformation_gradient_yx, deformation_gradient_yy, deformation_gradient_yz, deformation_gradient_zx, deformation_gradient_zy, deformation_gradient_zz, elastic_strain_xx, elastic_strain_xy, elastic_strain_xz, elastic_strain_yx, elastic_strain_yy, elastic_strain_yz, elastic_strain_zx, elastic_strain_zy, elastic_strain_zz, mechanical_strain_xx, mechanical_strain_xy, mechanical_strain_xz, mechanical_strain_yx, mechanical_strain_yy, mechanical_strain_yz, mechanical_strain_zx, mechanical_strain_zy, mechanical_strain_zz, pk1_stress_xx, pk1_stress_xy, pk1_stress_xz, pk1_stress_yx, pk1_stress_yy, pk1_stress_yz, pk1_stress_zx, pk1_stress_zy, pk1_stress_zz, pk2_stress_xx, pk2_stress_xy, pk2_stress_xz, pk2_stress_yx, pk2_stress_yy, pk2_stress_yz, pk2_stress_zx, pk2_stress_zy, pk2_stress_zz, plastic_strain_xx, plastic_strain_xy, plastic_strain_xz, plastic_strain_yx, plastic_strain_yy, plastic_strain_yz, plastic_strain_zx, plastic_strain_zy, plastic_strain_zz, small_stress_xx, small_stress_xy, small_stress_xz, small_stress_yx, small_stress_yy, small_stress_yz, small_stress_zx, small_stress_zy, small_stress_zz, strain_xx, strain_xy, strain_xz, strain_yx, strain_yy, strain_yz, strain_zx, strain_zy, strain_zz, stress_xx, stress_xy, stress_xz, stress_yx, stress_yy, stress_yz, stress_zx, stress_zy, stress_zz, effective_plastic_strain, effective_creep_strain, firstinv_stress, firstinv_cauchy_stress, firstinv_pk1_stress, firstinv_pk2_stress, firstinv_small_stress, firstinv_strain, hydrostatic_stress, hydrostatic_cauchy_stress, hydrostatic_pk1_stress, hydrostatic_pk2_stress, hydrostatic_small_stress, intensity_stress, intensity_cauchy_stress, intensity_pk1_stress, intensity_pk2_stress, intensity_small_stress, l2norm_mechanical_strain, l2norm_stress, l2norm_cauchy_stress, l2norm_pk1_stress, l2norm_strain, l2norm_elastic_strain, l2norm_plastic_strain, l2norm_creep_strain, max_principal_mechanical_strain, max_principal_stress, max_principal_cauchy_stress, max_principal_pk1_stress, max_principal_pk2_stress, max_principal_small_stress, max_principal_strain, maxshear_stress, maxshear_cauchy_stress, maxshear_pk1_stress, maxshear_pk2_stress, maxshear_small_stress, mid_principal_mechanical_strain, mid_principal_stress, mid_principal_cauchy_stress, mid_principal_pk1_stress, mid_principal_pk2_stress, mid_principal_small_stress, mid_principal_strain, min_principal_mechanical_strain, min_principal_stress, min_principal_cauchy_stress, min_principal_pk1_stress, min_principal_pk2_stress, min_principal_small_stress, min_principal_strain, secondinv_stress, secondinv_cauchy_stress, secondinv_pk1_stress, secondinv_pk2_stress, secondinv_small_stress, secondinv_strain, thirdinv_stress, thirdinv_cauchy_stress, thirdinv_pk1_stress, thirdinv_pk2_stress, thirdinv_small_stress, thirdinv_strain, triaxiality_stress, triaxiality_cauchy_stress, triaxiality_pk1_stress, triaxiality_pk2_stress, triaxiality_small_stress, volumetric_mechanical_strain, volumetric_strain, vonmises_stress, vonmises_cauchy_stress, vonmises_pk1_stress, vonmises_pk2_stress, directional_stress, directional_strain, axial_stress, axial_strain, axial_plastic_strain, axial_creep_strain, axial_elastic_strain, hoop_stress, hoop_strain, hoop_plastic_strain, hoop_creep_strain, hoop_elastic_strain, radial_stress, radial_strain, spherical_hoop_stress, spherical_hoop_strain, spherical_hoop_plastic_strain, spherical_hoop_creep_strain, spherical_hoop_elastic_strain, spherical_radial_stress, spherical_radial_strain
Controllable:No
Description:Add scalar quantity output for stress and/or strain
material_output_familySpecifies the family of FE shape functions to use for this variable.
C++ Type:MultiMooseEnum
Options:MONOMIAL, LAGRANGE
Controllable:No
Description:Specifies the family of FE shape functions to use for this variable.
material_output_orderSpecifies the order of the FE shape function to use for this variable.
C++ Type:MultiMooseEnum
Options:CONSTANT, FIRST, SECOND, THIRD, FOURTH, FIFTH, SIXTH, SEVENTH, EIGHTH, NINTH
Controllable:No
Description:Specifies the order of the FE shape function to use for this variable.

Output Parameters

blockThe list of ids of the blocks (subdomain) that the stress divergence kernels will be applied to
C++ Type:std::vector<SubdomainName>
Controllable:No
Description:The list of ids of the blocks (subdomain) that the stress divergence kernels will be applied to
diag_save_inThe displacement diagonal preconditioner terms
C++ Type:std::vector<AuxVariableName>
Controllable:No
Description:The displacement diagonal preconditioner terms
save_inThe displacement residuals
C++ Type:std::vector<AuxVariableName>
Controllable:No
Description:The displacement residuals

Advanced Parameters

out_of_plane_directionzThe direction of the out-of-plane strain.
Default:z
C++ Type:MooseEnum
Options:x, y, z
Controllable:No
Description:The direction of the out-of-plane strain.
out_of_plane_pressure_functionFunction used to prescribe pressure (applied toward the body) in the out-of-plane direction (y for 1D Axisymmetric or z for 2D Cartesian problems)
C++ Type:FunctionName
Controllable:No
Description:Function used to prescribe pressure (applied toward the body) in the out-of-plane direction (y for 1D Axisymmetric or z for 2D Cartesian problems)
out_of_plane_pressure_material0Material used to prescribe pressure (applied toward the body) in the out-of-plane direction
Default:0
C++ Type:MaterialPropertyName
Controllable:No
Description:Material used to prescribe pressure (applied toward the body) in the out-of-plane direction
out_of_plane_strainVariable for the out-of-plane strain for plane stress models
C++ Type:VariableName
Controllable:No
Description:Variable for the out-of-plane strain for plane stress models
planar_formulationNONEOut-of-plane stress/strain formulation
Default:NONE
C++ Type:MooseEnum
Options:NONE, WEAK_PLANE_STRESS, PLANE_STRAIN, GENERALIZED_PLANE_STRAIN
Controllable:No
Description:Out-of-plane stress/strain formulation
pressure_factorScale factor applied to prescribed out-of-plane pressure (both material and function)
C++ Type:double
Controllable:No
Description:Scale factor applied to prescribed out-of-plane pressure (both material and function)
scalar_out_of_plane_strainScalar variable for the out-of-plane strain (in y direction for 1D Axisymmetric or in z direction for 2D Cartesian problems)
C++ Type:VariableName
Controllable:No
Description:Scalar variable for the out-of-plane strain (in y direction for 1D Axisymmetric or in z direction for 2D Cartesian problems)

Out-Of-Plane Stress/Strain Parameters

Associated Actions

Available Actions

Tensor Mechanics App
CommonTensorMechanicsActionStore common tensor mechanics parameters
TensorMechanicsActionSet up stress divergence kernels with coordinate system aware logic

(moose/modules/tensor_mechanics/test/tests/lagrangian/cartesian/total/action/action_L.i)

[Mesh]
  type = FileMesh
  file = 'L.exo'
[]

[GlobalParams]
  displacements = 'disp_x disp_y disp_z'
[]

[Modules]
  [TensorMechanics]
    [Master]
      [all]
        strain = SMALL
        add_variables = true
        new_system = true
        formulation = TOTAL
        volumetric_locking_correction = true
        generate_output = 'cauchy_stress_xx cauchy_stress_yy cauchy_stress_zz cauchy_stress_xy '
                          'cauchy_stress_xz cauchy_stress_yz strain_xx strain_yy strain_zz strain_xy '
                          'strain_xz strain_yz'
      []
    []
  []
[]

[Functions]
  [pfn]
    type = PiecewiseLinear
    x = '0    1    2'
    y = '0.00 0.3 0.5'
  []
[]

[BCs]
  [left]
    type = DirichletBC
    preset = true
    variable = disp_x
    boundary = fix
    value = 0.0
  []

  [bottom]
    type = DirichletBC
    preset = true
    variable = disp_y
    boundary = fix
    value = 0.0
  []

  [back]
    type = DirichletBC
    preset = true
    variable = disp_z
    boundary = fix
    value = 0.0
  []

  [front]
    type = FunctionDirichletBC
    variable = disp_z
    boundary = pull
    function = pfn
    preset = true
  []
[]

[Materials]
  [elastic_tensor]
    type = ComputeIsotropicElasticityTensor
    youngs_modulus = 100000.0
    poissons_ratio = 0.25
  []
  [compute_stress]
    type = ComputeLagrangianLinearElasticStress
  []
[]

[Preconditioning]
  [smp]
    type = SMP
    full = true
  []
[]

[Executioner]
  type = Transient

  solve_type = 'newton'

  petsc_options_iname = -pc_type
  petsc_options_value = lu

  nl_abs_tol = 1e-10
  nl_rel_tol = 1e-8

  end_time = 1.0
  dtmin = 0.5
  dt = 0.5
[]

[Outputs]
  [out]
    type = Exodus
    file_base = 'blah'
  []
[]

(moose/modules/tensor_mechanics/test/tests/lagrangian/cartesian/total/homogenization/action/action_3d.i)

# 3D mixed test

[GlobalParams]
  displacements = 'disp_x disp_y disp_z'
[]

[Mesh]
  [base]
    type = FileMeshGenerator
    file = '3d.exo'
  []

  [sidesets]
    type = SideSetsFromNormalsGenerator
    input = base
    normals = '-1 0 0
                1 0 0
                0 -1 0
                0 1 0
            '
              '    0 0 -1
                0 0 1'
    fixed_normal = true
    new_boundary = 'left right bottom top back front'
  []
[]

[Modules]
  [TensorMechanics]
    [Master]
      [all]
        strain = FINITE
        add_variables = true
        new_system = true
        formulation = TOTAL
        volumetric_locking_correction = false
        constraint_types = 'stress strain strain strain stress strain strain strain strain'
        targets = 'stress11 strain21 strain31 strain12 stress22 strain32 strain13 strain23 strain33'
        generate_output = 'pk1_stress_xx pk1_stress_xy pk1_stress_xz pk1_stress_yx pk1_stress_yy '
                          'pk1_stress_yz pk1_stress_zx pk1_stress_zy pk1_stress_zz '
                          'deformation_gradient_xx deformation_gradient_xy deformation_gradient_xz '
                          'deformation_gradient_yx deformation_gradient_yy deformation_gradient_yz '
                          'deformation_gradient_zx deformation_gradient_zy deformation_gradient_zz'
      []
    []
  []
[]

[Functions]
  [stress11]
    type = ParsedFunction
    expression = '120.0*t'
  []
  [stress22]
    type = ParsedFunction
    expression = '65*t'
  []
  [strain33]
    type = ParsedFunction
    expression = '8.0e-2*t'
  []
  [strain23]
    type = ParsedFunction
    expression = '2.0e-2*t'
  []
  [strain13]
    type = ParsedFunction
    expression = '-7.0e-2*t'
  []
  [strain12]
    type = ParsedFunction
    expression = '1.0e-2*t'
  []
  [strain32]
    type = ParsedFunction
    expression = '1.0e-2*t'
  []
  [strain31]
    type = ParsedFunction
    expression = '2.0e-2*t'
  []
  [strain21]
    type = ParsedFunction
    expression = '-1.5e-2*t'
  []
  [zero]
    type = ConstantFunction
    value = 0
  []
[]

[BCs]
  [Periodic]
    [x]
      variable = disp_x
      auto_direction = 'x y z'
    []
    [y]
      variable = disp_y
      auto_direction = 'x y z'
    []
    [z]
      variable = disp_z
      auto_direction = 'x y z'
    []
  []

  [fix1_x]
    type = DirichletBC
    boundary = "fix_all"
    variable = disp_x
    value = 0
  []
  [fix1_y]
    type = DirichletBC
    boundary = "fix_all"
    variable = disp_y
    value = 0
  []
  [fix1_z]
    type = DirichletBC
    boundary = "fix_all"
    variable = disp_z
    value = 0
  []

  [fix2_x]
    type = DirichletBC
    boundary = "fix_xy"
    variable = disp_x
    value = 0
  []
  [fix2_y]
    type = DirichletBC
    boundary = "fix_xy"
    variable = disp_y
    value = 0
  []

  [fix3_z]
    type = DirichletBC
    boundary = "fix_z"
    variable = disp_z
    value = 0
  []
[]

[Materials]
  [elastic_tensor_1]
    type = ComputeIsotropicElasticityTensor
    youngs_modulus = 100000.0
    poissons_ratio = 0.3
    block = '1'
  []
  [elastic_tensor_2]
    type = ComputeIsotropicElasticityTensor
    youngs_modulus = 120000.0
    poissons_ratio = 0.21
    block = '2'
  []
  [elastic_tensor_3]
    type = ComputeIsotropicElasticityTensor
    youngs_modulus = 80000.0
    poissons_ratio = 0.4
    block = '3'
  []
  [elastic_tensor_4]
    type = ComputeIsotropicElasticityTensor
    youngs_modulus = 76000.0
    poissons_ratio = 0.11
    block = '4'
  []
  [compute_stress]
    type = ComputeLagrangianLinearElasticStress
    large_kinematics = true
  []
[]

[Preconditioning]
  [smp]
    type = SMP
    full = true
  []
[]

[Executioner]
  type = Transient

  solve_type = 'newton'
  line_search = none

  petsc_options_iname = '-pc_type'
  petsc_options_value = 'lu'

  l_max_its = 2
  l_tol = 1e-14
  nl_max_its = 20
  nl_rel_tol = 1e-8
  nl_abs_tol = 1e-10

  start_time = 0.0
  dt = 0.2
  dtmin = 0.2
  end_time = 1.0
[]

[Outputs]
  [out]
    type = Exodus
    file_base = '3d'
  []
[]

(moose/modules/tensor_mechanics/test/tests/finite_strain_elastic/finite_strain_elastic_new_test.i)

[Mesh]
  type = GeneratedMesh
  dim = 3
  elem_type = HEX8
[]

[GlobalParams]
  displacements = 'disp_x disp_y disp_z'
[]

[Functions]
  [./tdisp]
    type = ParsedFunction
    expression = '0.01 * t'
  [../]
[]

[Modules]
  [./TensorMechanics]
    [./Master]
      [./all]
        strain = FINITE
        add_variables = true
      [../]
    [../]
  [../]
[]

[BCs]
  [./symmy]
    type = DirichletBC
    variable = disp_y
    boundary = bottom
    value = 0
  [../]
  [./symmx]
    type = DirichletBC
    variable = disp_x
    boundary = left
    value = 0
  [../]
  [./symmz]
    type = DirichletBC
    variable = disp_z
    boundary = back
    value = 0
  [../]
  [./tdisp]
    type = FunctionDirichletBC
    variable = disp_z
    boundary = front
    function = tdisp
  [../]
[]

[Materials]
  [./elasticity_tensor]
    type = ComputeElasticityTensor
    C_ijkl = '1.684e5 0.176e5 0.176e5 1.684e5 0.176e5 1.684e5 0.754e5 0.754e5 0.754e5'
    fill_method = symmetric9
  [../]
  [./stress]
    type = ComputeFiniteStrainElasticStress
  [../]
[]

[Preconditioning]
  [./smp]
    type = SMP
    full = true
  [../]
[]

[Executioner]
  type = Transient
  dt = 0.05

  #Preconditioned JFNK (default)
  solve_type = 'PJFNK'

  petsc_options_iname = -pc_hypre_type
  petsc_options_value = boomeramg
  nl_abs_tol = 1e-10
  nl_rel_step_tol = 1e-10
  dtmax = 10.0
  nl_rel_tol = 1e-10
  end_time = 1
  dtmin = 0.05
  num_steps = 10
  nl_abs_step_tol = 1e-10
[]

[Outputs]
  exodus = true
[]

(moose/modules/tensor_mechanics/test/tests/action/two_block_new.i)

[Mesh]
  [generated_mesh]
    type = GeneratedMeshGenerator
    dim = 2
    nx = 4
    ny = 4
  []
  [block1]
    type = SubdomainBoundingBoxGenerator
    block_id = 1
    bottom_left = '0 0 0'
    top_right = '0.5 1 0'
    input = generated_mesh
  []
  [block2]
    type = SubdomainBoundingBoxGenerator
    block_id = 2
    bottom_left = '0.5 0 0'
    top_right = '1 1 0'
    input = block1
  []
[]

[GlobalParams]
  displacements = 'disp_x disp_y'
[]

[Modules/TensorMechanics/Master]
  # parameters that apply to all subblocks are specified at this level. They
  # can be overwritten in the subblocks.
  add_variables = true
  strain = FINITE
  generate_output = 'stress_xx'

  [./block1]
    # the `block` parameter is only valid insde a subblock.
    block = 1
  [../]
  [./block2]
    block = 2
    # the `additional_generate_output` parameter is also only valid inside a
    # subblock. Values specified here are appended to the `generate_output`
    # parameter values.
    additional_generate_output = 'strain_yy'
  [../]
[]

[AuxVariables]
  [./stress_theta]
    order = CONSTANT
    family = MONOMIAL
  [../]
  [./strain_theta]
    order = CONSTANT
    family = MONOMIAL
  [../]
[]

[AuxKernels]
  [./stress_theta]
    type = RankTwoAux
    rank_two_tensor = stress
    index_i = 2
    index_j = 2
    variable = stress_theta
    execute_on = timestep_end
  [../]
  [./strain_theta]
    type = RankTwoAux
    rank_two_tensor = total_strain
    index_i = 2
    index_j = 2
    variable = strain_theta
    execute_on = timestep_end
  [../]
[]

[Materials]
  [./elasticity_tensor]
    type = ComputeIsotropicElasticityTensor
    youngs_modulus = 1e10
    poissons_ratio = 0.345
  [../]
  [./_elastic_stress1]
    type = ComputeFiniteStrainElasticStress
    block = 1
  [../]
  [./_elastic_stress2]
    type = ComputeFiniteStrainElasticStress
    block = 2
  [../]
[]

[BCs]
  [./left]
    type = DirichletBC
    boundary = 'left'
    variable = disp_x
    value = 0.0
  [../]
  [./top]
    type = DirichletBC
    boundary = 'top'
    variable = disp_y
    value = 0.0
  [../]
  [./right]
    type = DirichletBC
    boundary = 'right'
    variable = disp_x
    value = 0.01
  [../]
  [./bottom]
    type = DirichletBC
    boundary = 'bottom'
    variable = disp_y
    value = 0.01
  [../]
[]

[Debug]
  show_var_residual_norms = true
[]

[Executioner]
  type = Steady

  petsc_options_iname = '-ksp_gmres_restart -pc_type -pc_hypre_type -pc_hypre_boomeramg_max_iter'
  petsc_options_value = '  201               hypre    boomeramg      10'

  line_search = 'none'

  nl_rel_tol = 5e-9
  nl_abs_tol = 1e-10
  nl_max_its = 15

  l_tol = 1e-3
  l_max_its = 50
[]

[Outputs]
  exodus = true
[]